RURAL MERCHANDISE: OIL & GREASE

Nulon "Start Ya Bastard" Instant Engine Starter (SYB) promotes easy starting of all diesel and petrol engines (both two-stroke and four-stroke). In searching for a name for this product, we could not get away from the three words most commonly used to describe a difficult-to-start engine "Start Ya Bastard". We trust you will not be offended.
Nulon's SYB high potency, highly concentrated, highly flammable formulation is designed to instantly start difficult-to-start engines. Of course an engine has to be in sound condition and tuned correctly for it to start at all. However, there are many reasons why an engine can be difficult to start, such as:
Petrol Engines
Old or stale fuel
Low battery condition
Poor choke operation
Cold ambient temperature
Insufficient engine cranking speed, particularly on manual start engines such as motor mowers, small motorcycles etc.
Engine has been sitting idle for a long time
Frail people who are not strong enough to pull a start cord quickly enough
Initial start after repair work
Diesel Engines
Cold ambient temperatures
Faulty glow plugs
Old, stale, or out of season fuel
Low cylinder pressures
Low battery
Initial start after repair work or bleeding fuel system
There is nothing more annoying than an engine that refuses to start. Nulon SYB should be kept on hand at all times in the glove box, in the workshop or in the home garage, the boat, or the tractor. One never knows when an engine will become stubborn and refuse, or be difficult to start. Nulon SYB will help preserve battery condition and it is totally harmless to engines. One short spray of Nulon is all that is necessary to start the most stubborn of engines.

High-quality synthetic lubricating oil specially developed for the lubrication of forklifts.
Pressure-resistant lubricant for the forklift and its accessories
Vibration and noise-reducing
Very good lubricating properties
Reliable protection against corrosion
High degree of penetration
Outstanding compatibility with most metals, rubber and plastic parts used in forklifts. O-ring and X-ring compatible, also compatible with plastics
Neutral behaviour on painted substrates
Free from silicone, resin and acid
Temperature application range: -25°C to 180°C. Short-term: 200°C
Notice
Shake the can before use, spray the parts and let it take effect briefly. After using, spray the can upside down until it is empt

Spray oxidation solvent
Cleans all types of contact
Removes oxide and sulphide coatings, resin, oil and dirt
Eliminates "bangs" as well as impermissible high voltage resistances
Versatile range of applications – Does not attack most construction materials
Halogen-free
Notice
Oxidation solvent contact spray must be completely flashed off before the electrical system is restarted!
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Special, highly active system cleaner for 2- and 4-stroke engines.

Possible to clean without removing components

Overhead valve

Hard-to-reach areas can be easily accessed

Excellent cleaning performance

• Optimum carburettor performance
• Perfect throttle valve function
  

Quiet engine running

Faults caused by dirty throttle valves or carburettors are rectified.

Notice

For various throttle valve units, it is advantageous to remove them in order to be able to optimally clean the underside of the throttle valve.

Suitable for petrol engines only! Clean diesel injection nozzles only when they are removed.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

For cleaning and degreasing during maintenance and repair work

Fast flash-off behaviour and excellent cleaning performance

• Fast and effective removal of soot, grease, brake dust and oily residues
• Residue-free cleaning

Overhead valve for 360° application

High material compatibility with paints, plastics, seals and rubber

Acetone-free

AOX and silicone-free

Notice

Do not spray on hot parts. Not suitable for surface cleaning of adhesive areas. Prior to application, the compatibility of rubber or plastic parts and painted surfaces should be checked on an area that is not visible.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

EP long-life spray grease for excellent protection against weathering and environmental influences

Low adhesion of dust and dirt

• Ideal for open lubrication outdoors
• Longer lubricating grease life
• Outstanding sealing behaviour
• Extends lubrication intervals

Resistant to salt water and spray water, weak acids and bases

• Outstanding corrosion protection
• Lubricant does not wash off
• Resistant to oxidation
  

High pressure load of lubricated parts

• EP (extreme pressure) additives for extremely high pressure resistance
• Outstanding noise and vibration damping

Minimises wear and substance loss of lubricating points

• Reduces friction temperature which extends the lubricating effect
• Low wear

Free from silicone, resin and acids

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Lubricant, penetrating and water displacing agent

• Loosens seized and rusted parts
• With PTFE and 360° valve
• Silicone-free
• Removes moisture from electrical systems
• Strong water displacement effect
• Exceptional corrosion protection
• Effective capillary action for penetrating rusted and corroded parts